高速线棒材磁力定尺输送装置

原创 磁力搬铁机  2017-11-05 12:49  阅读 3,095 次
摘要:

MTE高速线棒材磁力定尺输送装置是用于钢铁行业高速线(棒)材厂,安装在冷剪前,通过装置内的磁板吸住线(棒)材层,使线(棒)材按指定速度输送至冷剪下。能够严格控制线(棒)材的定尺长度,使线(棒)材的定尺长度误差在±5mm以内,远高于国标(GB1499.1-2008和GB1499.2-2007)±25mm的要求,大大提高了线(棒)材的正品率。

高速线棒材磁力定尺输送装置

高速线棒材磁力定尺输送装置概述 :

MTE高速线棒材磁力定尺输送装置是用于钢铁行业高速线(棒)材厂,安装在冷剪前,通过装置内的磁板吸住线(棒)材层,使线(棒)材按指定速度输送至冷剪下。能够严格控制线(棒)材的定尺长度,使线(棒)材的定尺长度误差在±5mm以内,远高于国标(GB1499.1-2008和GB1499.2-2007)±25mm的要求,大大提高了线(棒)材的正品率。

Profile:

Magnetic transporting equipment is used in high speed rod factory of steel and iron industry, installed in the front of cold shear. Rod is attracted by inner magnetic plate and transported to be under the cold shear as per appointed speed. Which achieves strictly controlling rod cut length, the cut length error is ±5mm (national standard GB1499.1-2008 and GB1499.2-2007 are ±25mm), the rate of rod quality is improved greatly.

高速线棒材磁力定尺输送装置安装示意

 

高速线棒材磁力定输送装置主要特点

1、高速线棒材磁力定尺输送装置由底座、本体、篦条构成,三部件都可分离,方便安装和维护;

2、本体主要由磁板、非磁板、传动部件组成;

3、磁板采用合理的磁路结构,能在磁吸表面产生强大的吸力,大的磁场可达到5000Gs,非吸附面无漏磁,装配方便、安全;

4、传动由主动轮、从动轮、调整轮、链条和驱动电机组成,通过调整轮可方便地调整链条的松紧,使设备达到良好的运行状态;

5、链板表面均采用高耐磨材料加工而成;耐磨、使用寿命长。
Main Features

1、Magnetic transporting equipment consists of base, body and grate bar, which can be separated, it is easy to install and maintain.

2、Main body consists of magnetic plate, non-magnetic plate and driving part;

3、Magnetic plate adopts reasonable magnetic circuit structure to generate strong attracting force on magnetic attracting surface, max. magnetic field strength can reach at 5000Gs, non-attracting surface has no magnetic leakage, it is easy to assemble and safety;

4、Driving part consists of driving pulley, driven pulley, regulating pulley, chain and driving motor, the tightness of chain can be adjusted by regulating pulley to make equipment be in good operation state.

5、Surface of magnetic plate adopts high wear-resistance material; wear resistant and long service life.

 

高速线棒材磁力定尺输送装置现场案例

 

工作原理

高速线棒材磁力定尺输送装置的启停由冷床信号控制,当冷床有线(棒)材输送过来时,驱动电机启动带动链板运转,线(棒)材由冷床辊道输送至链板上,并被链板中的磁板吸住,使线(棒)材按指定速度输送至冷剪。磁板产生强大的磁力吸住棒层,使其在运动过程中和被剪断时不会产生相对运动,从而达到精确控制线(棒)材定尺的目的。

Working Principle

Start and stop of Magnetic transporting equipment are controlled by signal of cold bed, when rod is transported to cold bed, operation of chain plate is driven by start of driving motor, rod is transported to chain plate by cold bed, and attracted by magnetic plate in chain plate, then rod is transported to cold shear as per appointed speed. Magnetic plate generates strong magnetic force to attract rod, rod can’t appear relative movement when it moves and is sheared, and thus rod cut length is controlled accurately.

适用范围

高速线棒材磁力定尺输送装置适用于热轧螺纹钢、普碳钢、优碳钢、低合金钢等被剪轧件,可满足轧件断面尺寸Φ10~60mm。

Application Scope

Magnetic transporting equipment is used for rolled piece such as hot rolled deformed bar, plain carbon steel, superior carbon steel and low alloy steel etc. which can meet section dimension of rolled piece Φ10~60mm.

应用效果展示 Application Effect

高速线棒材磁力定尺输送装置使用效果

 

主要技参数:Main Technical Data

高速线棒材磁力定尺输送装置外形尺寸图

 

型号 辊道宽度 有效长度 外形尺寸 质量
Model Rollway width Effective length Over dimansion Weight
B(mm) A(mm) L*W*H (mm) Kg
MTE-16080 800 1600 2700*1500*1600 4250
MTE-18080 800 1800 3000*1500*1600 4700
MTE-20080 800 2000 3200*1500*1600 5250
MTE-24080 800 2400 3600*1500*1600 6300
MTE-28080 800 2800 4000*1500*1600 7350
注:

适合轧件圆钢的规格Ф10~60mm,

温度<300℃,

辊道的速度0.8~1.8m/s。

Note:

suitable for rolling round steel specifications 10~60mm,

temperature <300,

roller speed 0.8~1.8m/s.

注:可按用户要求定制,可配套电控系统。

Note: Customized as per request of user, and equipped with electric control system.

 

网站声明:此网站技术参数、案例、报价等所有内容都是编辑人员从事磁力装备行业十余年后的个人工作经验总结,免费分享给大家参考,不用于商业、广告、或者其它用途。

本文地址:https://www.clbtj.com/903
关注我们:请关注一下我们的微信公众号:扫描二维码磁力搬铁机的公众号,公众号:13789018701
版权声明:本文为原创文章,版权归 磁力搬铁机 所有,欢迎分享本文,转载请保留出处!

发表评论


表情